Braided Bun

This hairstyle is so cute and takes like 10 minutes!

What you do is take two little sections at the bottom of your hair and braid them. Take the rest of your hair and put it in a low pony-tail. With your palm facing up, wrap your pony-tail around your hand up towards your head. If your layers keep falling out spray it with some water. If you have thinner hair and/or a lot of good bobby pins, then you can just make the bun without putting it in a pony-tail first. I think it looks a little better that way, but its harder to get it to stay so I usually put it in a pony-tail first. When you get a good bun, bobby pin it all around so that it's secure. Then take your two braids and wrap them around, secure with bobby pins, hairspray, and you're done! So cute, quick, and easy!

This might be helpful...

so I found this video, and it's a lot more complicated then the tutorial so I would just combine the two. I just decided to post it because it showed how to shape the ring

Spoon rings!!

alright so I love rings and I just can't get enough of them! Spoon rings are so cute and nifty, especially when you can make them yourself, I found this tutorial and I haven't tried it yet because I don't have any silver but I will soon!

Things you will need:

• Spoon (or fork) of your choosing - make SURE it is sterling silver
• Metal cutter, hacksaw, or jewelry saw
• File
• Sandpaper
• Hammer or mallet
• Dowel or ring mandrel
• Paper
• Pen
• Butane torch (optional)

1. The first thing you are going to want to do is to decide what type of ring you want to make.  You can either make one that wraps up your finger (top two images), or you can make one that wraps around itself (bottom image).  The one you choose determines the length of the handle (longer for the one that wraps up your finger).  For future reference, we'll call the rings that wrap up your finger "type 1" and the kind that wrap around itself "type 2."

  

2. Once you have picked out the type of ring to make, you then have to pick out your silverware of choice.  To find mine, I just went to a local thrift store where I got these for around 10 cents each.  While you can use any type of silverware, I recommend looking for ones as thin as possible for they will be the easiest to bend.  When you do go buy your silverware, make sure it is sterling silver and not stainless steel (it will say on the back of the spoon).  I didn't realize this at first, so my first attempt (pictured below), was with a stainless steel fork, and let's just say, it didn't work too well.  You'll know it's sterling silver if it says "900" or "925" on the back. 

3. The next thing you will want to do is to measure your finger.  One of the easiest ways to do this is by simply cutting a strip of paper, wrapping it around your finger, and marking where it overlaps.  If you are making the type 2 ring, add an extra 1/4 in or so for the overlap.  If you are making the type 1 ring, this step isn't as crucial because you will just continue wrapping it until you've used all of the handle. 

4. For this next step you will need your saw or metal cutter.  If you are making type 1, cut the handle right above the bowl.  For type 2, cut the handle at whatever length you measured in Step 3.

 

5. File the cut end with a metal file, and then with traditional sandpaper until it is smooth.  Start with a coarse sandpaper, and work your way down to a fine grit to get a super smooth finish.

6. Now comes the fun (or frustrating!) part - bending the spoon.  There are several ways to accomplish this.  You can bend it around the dowel using shear force, you can hammer it around the dowel, or you can use a butane torch to heat it up before you bend it.  I would recommend going out and buying a butane torch if you don't have one because it is by FAR the easiest way.  I found this little guy for $7 at Home Depot and it saved my life.  I tried bending it and hammering it and neither was working for me.  (you can see the results of my bending attempts below).  However, once I bought the right type of spoon, it was a lot easier to bend. 

If you do use a hammer, I recommend wrapping some sort of cloth (a dishtowel folded in half works well) around the head of the hammer and securing it in place with a rubber band.  This will help to protect the metal from scratches.  

If you torch it, you'll have to heat it up for awhile.  You should be able to bend it before it starts glowing orange, but if you want to be extra sure, heat it until it glows.  

7. This last step is optional, but if you so desire, you can polish or buff the ring for a shiny finish.  I would recommend this if you used the butane torch (this is what it looks like without polishing).